Welcome to Chem Zipper.com......: SLAG : PYROMETALLURGY:

Search This Blog

Wednesday, June 26, 2019

SLAG : PYROMETALLURGY:


 In some cases, a flux must be added to the mixture during smelting to help separate the two materials. The flux is a material that will react with the gangue to form a substance with a low melting point. For example, oxides of silicon within gangue can be liquefied by reaction with calcium carbonate according to the reaction:
The waste liquid solution that forms from the flux and gangue is usually a silicate material called a slag. The liquid metal and the liquid slag have different densities and therefore separate. Holes tapped at different heights into the side of the container holding the liquid metal and slag allow the more dense liquid to flow out of the lower tap holes and the less dense liquid to flow out of the higher tap holes.
Principle of Slag formation:
The principle of slag formation is essentially the following:
Nonmetal oxide (acidic) + Metal oxide (basic) to form a Fusible (easily melted) slag
Removal of unwanted basic and acidic oxides: For example, FeO is the impurity in extraction of Cu from copper pyrite.
Matte also contains a very small amount of iron (II) sulphide.
To remove unwanted acidic impurities like sand and P4O10, smelting is done in the presence of limestone.
Properties of a Slag:
(1) Slag is a fusible mass.
(2) It has low melting point.
(3) It is lighter than and immiscible with the molten metal. It is due to these impurities that the slag floats as a separate layer on the molten metal and can thus be easily separated from the metal. The layer of the slag on the molten metal prevents the metal from being oxidised.

No comments:

Post a Comment