50 ml of dry ammonia gas was sparked for a long time in an eudiometer tube over mercury. After sparkling, the volume becomes 97 ml. After washing the gas with water and drying, the volume becomes 94 ml. This was mixed with 60.5 ml of oxygen and the mixture was burnt. After the completion of the combustion of H2 , the volume of residual gas was 48.75 ml. Derive the molecular formula of ammonia. (Given, N and H are only present in ammonia molecule).

Related Questions:

(1) 1 ml of gaseous aliphatic compound CnH3nOm is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

(2) 1 ml of gaseous aliphatic compound CxHyOz is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

(3) 50 ml of C3H8 is mixed with 300 ml of oxygen for complete combustion find out the final volume and volume concentration.

(4) 10 ml of gaseous hydrocarbon on combustion gives 40 ml. of CO2 (g) and 50 ml of H2O (vap). The hydrocarbon is

10 ml of gaseous hydrocarbon on combustion gives 40 ml. of CO2 (g) and 50 ml of H2O (vap). The hydrocarbon is

Related Questions:

(1) 1 ml of gaseous aliphatic compound CnH3nOm is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

(2) 1 ml of gaseous aliphatic compound CxHyOz is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

(3) 50 ml of C3H8 is mixed with 300 ml of oxygen for complete combustion find out the final volume and volume concentration.

Calculate the molality and Molarity of a solution of H2SO4 that is 49 % (w/W) and has a density of 1.1g/cc

ILLUSTRATIVE EXAMPLES:

(1):Calculate the mole fraction of solute in the 12 molal aqueous solution of CaCO3.

(2):The mole fraction of glucose in aqueous solution is 0.2 , The molality of solution will be.

(3):If the mole fraction of a solute is changed from 1/4 to 1/2 in the 800 gm of solvent . then the ratio of molality will be .

(4):Mole fraction of I2 (iodine) in benzene (C6H6) is 0.2 . Calculate the molality of iodine (I2) in benzene.

(5):Calculate the amount of water that should be added to 16 gm methanol to make mole fraction of methanol as 0.25.?

A solution of NaOH which is 60 %(w/V) is found to have a density of 1.2g/cc. Find its %(w/W) and Molarity.

ILLUSTRATIVE EXAMPLES:

(1):Calculate the mole fraction of solute in the 12 molal aqueous solution of CaCO3.

(2):The mole fraction of glucose in aqueous solution is 0.2 , The molality of solution will be.

(3):If the mole fraction of a solute is changed from 1/4 to 1/2 in the 800 gm of solvent . then the ratio of molality will be .

(4):Mole fraction of I2 (iodine) in benzene (C6H6) is 0.2 . Calculate the molality of iodine (I2) in benzene.

(5):Calculate the amount of water that should be added to 16 gm methanol to make mole fraction of methanol as 0.25.?

Equal moles of hydrogen and oxygen gases are placed in a container with a pin-hole through which both can escape. What fraction of the oxygen escapes in the time required for one- half of the hydrogen to escape.

Related Questions;

(1) Two closed bulbs of equal volume (V) containing an ideal gas initially at pressure Pi and temperature Ti are connected through a narrow tube of negligible volume as shown in the figure below. The pressure of one of the bulb is raised to T2. The final pressure is: (JEE Mains-2016)

(2) A closed tank has two compartments A and B, both filled with oxygen (assumed to be ideal gas). The partition separating the two compartments is fixed and is a perfect heat insulator (Figure 1). If the old partition is replaced by a new partition which can slide and conduct heat but does not allow the gas to leak across (Figure 2), the volume (in m3) of the compartment A after the system attains equilibrium is--- (IIT-Ad-2018)

(3) A sample of butane gas C4H10 of unknown mass is contained in a vessel of unknown volume V at 25oC and a pressure of 760 mmHg. To this vessel 8.6787 g of neon gas is added in such a waythat no butane is lost from the vessel. The final pressure in the vessel is 1920 mm Hg at the same temperature. Calculate the volume of the vessel and the mass of butane.

(4) One litre flask contains air, water vapour and a small amount of liquid water at a pressure of 200 mmHg. If this is connected to another one-litre evacuated flask, what will be the final pressure of the gas mixture at equilibrium?Assume the temperature to be 50°C.Aqueous tension at 50°C = 93 mm Hg.

(5) 1 mole of N2 and 3 moles of H2 are mixed in 8.21 lit. container at 300 K to form NH3 . If at equilibrium, average molecular mass was found to be 34/3, then find partial pressure of each component.

(6) A vessel of 2 lit. capacity contains hydrogen at 380 mm pressure at 27°C. 16 gm of O2 is added to the container at constant temperature, then find the final total pressure and final partial pressure of H2 . Sol. As partial pressure of a gas is independent from the pressure of other gas, initial as well as final partial pressue of H2 gas,

(7) A mixture of CO and CO2 is found to have a density of 1.50 g/litre at 30oC and 730 mm. The mole percent of CO in the mixture is