50 ml of C3H8 is mixed with 300 ml of oxygen for complete combustion find out the final volume and volume concentration.

 

Related Questions:

(1) 1 ml of gaseous aliphatic compound CnH3nOm is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

(2) 1 ml of gaseous aliphatic compound CxHyOz is completely burnt in an excess of O2 and cooled to room temperature. The contraction in volume is..

The maximum number of hydrogen bonds formed by a water molecule in ice is.

 

Related Questions:

What is the temperature at density of water is maximum ?

Why ice floats on water at room temperature ?

Why density of water is greater than ice ?

What is "Nascent" Hydrogen ?

How many gram Cu will deposited by passing 2 Amp for 30 minutes in aq solution of CuSO4. What will be weight of O2 produced at anode?

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

(9) How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

(10) 1 M aqueous solution of NaCl undergo electrolysis if 50 mA current is passed for 12 hours assume current efficiency is 25%. The total volume of gas produced at standard state is. NaCl (aq) solution undergoes electrolysis as:

(11) Zn amalgam is prepared by electrolysis of aqueous ZnCl2 using 9 gram Hg cathode. How much current is to be passed through ZnCl2 solution for 1000 seconds to prepare of Zn amalgam with 20% weight? (Atomic wt, Zn = 65.4 g)

(12) During electro refining of Cu how much time is needed to produce 250g Cu on the cathode if the current is kept at 11 A?

(12) Find the Volume of gas evolved by passing 0.965 Amp current for 1 hour through an aqueous solution CH3COONa at 250c and 1 atm?

Find the Volume of gas evolved by passing 0.965 Amp current for 1 hour through an aqueous solution CH3COONa at 250c and 1 atm?

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

(9) How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

(10) 1 M aqueous solution of NaCl undergo electrolysis if 50 mA current is passed for 12 hours assume current efficiency is 25%. The total volume of gas produced at standard state is. NaCl (aq) solution undergoes electrolysis as:

(11) Zn amalgam is prepared by electrolysis of aqueous ZnCl2 using 9 gram Hg cathode. How much current is to be passed through ZnCl2 solution for 1000 seconds to prepare of Zn amalgam with 20% weight? (Atomic wt, Zn = 65.4 g)

(12) During electro refining of Cu how much time is needed to produce 250g Cu on the cathode if the current is kept at 11 A?

During electro refining of Cu how much time is needed to produce 250g Cu on the cathode if the current is kept at 11 A?

Given that current (i) = 11 A = 11 cycle/second

Number of moles of copper deposited on cathode is 

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

(9) How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

(10) 1 M aqueous solution of NaCl undergo electrolysis if 50 mA current is passed for 12 hours assume current efficiency is 25%. The total volume of gas produced at standard state is. NaCl (aq) solution undergoes electrolysis as:

(11) Zn amalgam is prepared by electrolysis of aqueous ZnCl2 using 9 gram Hg cathode. How much current is to be passed through ZnCl2 solution for 1000 seconds to prepare of Zn amalgam with 20% weight? (Atomic wt, Zn = 65.4 g)

Zn amalgam is prepared by electrolysis of aqueous ZnCl2 using 9 gram Hg cathode. How much current is to be passed through ZnCl2 solution for 1000 seconds to prepare of Zn amalgam with 20% weight? (Atomic wt, Zn = 65.4 g)

 Let “x “gram of Zn deposited on 9 gm of Hg:

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

(9) How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

(10) 1 M aqueous solution of NaCl undergo electrolysis if 50 mA current is passed for 12 hours assume current efficiency is 25%. The total volume of gas produced at standard state is. NaCl (aq) solution undergoes electrolysis as:

1 M aqueous solution of NaCl undergo electrolysis if 50 mA current is passed for 12 hours assume current efficiency is 25%. The total volume of gas produced at standard state is. NaCl (aq) solution undergoes electrolysis as:

NaCl(aq) àNa⁺ + Cl^-

        H₂O à H⁺ + HO^-

Reactions:

At cathode: 2H⁺ + 2e^-à H_2(g)

At anode:   2Cl^-à Cl_2(g) + 2e^-

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

(9) How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 cm thick layer density of silver is 10.5g/cm3.

Given Area = 80 cm³

   Thickness = 0.0005 cm

        Density= 10.5 gl cm³

Thus Mass of silver deposited on cathode is = 80 cm³ x 0.0005 cm x10.5 gm/cm³= 0.42 gm

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

(8) 0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

0.5 faraday of electricity was passed to deposit all the copper present in 500 ml of CuSO4 solution. What was the Molarity of this solution?

 

Related Questions:

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

(7) Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

Ag is electrodeposited on a vessel of total surface area 800 cm2 by passing current of 0.2 A for 3 hrs. Calculate thickness of Ag deposited. (Density Ag = 9.67 g/ml).

 

(1) A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(5) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(6) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

In Arrhenius equation for a certain reaction, the value of A and Ea (activation energy) are 4x 10^13 sec^-1 and 98.6 kJ mole^-1 respectively. At what temperature, the reaction will have specific rate constant 1.1x 10^-3 sec^-1.

 Arrhenius equation:

The temperature dependence of rate of a chemical reaction can be accurately explained by Arrhenius equation. It was first proposed by Dutch chemist   J.H. Vant’s Hoff but Swedish chemist Arrhenius provides its physical justification and interpretation.

                            

Where  

 K= Rate constant

 A= Arrhenius constant or frequency factor or pre exponential factor

 R= Universal gas constant =25/3 joule per mole per second

Ea= Activation Energy

 T= temperature

-Ea/RT= Boltzmann factor or fraction of molecule having equal or greater than Activation energy or fraction of molecule that have kinetic energy greater than activation energy.

Related Questions:

(1) What is Arrhenius equation ?

(2) what happen when activation energy of a chemical reaction becomes equal to RT?

(3) What is the activation energy and how to different from threshold energy ?

(4) In Arrhenius equation for a certain reaction, the value of A and Ea (activation energy) are 4 × 10^13 sec–1 and 98.6 kJ mol–1 respectively. At what temperature, the reaction will have specific rate constant 1.1 × 10^–3 sec–1?

(5) The energy of activation for a reaction is 100 kJ mol–1. Presence of a catalyst lowers the energy of activation by 75%.What will be effect on rate of reaction at 20ºC, other things being equal?

(6) A drug becomes ineffective after 30 % decomposition. The original concentration of a sample was 5mg/mL which becomes 4.2 mg/mL during 20 months. Assuming the decomposition of first order , calculate the expiry time of the drug in months. What is the half life of the product?

(7) A first order reaction is 20 % completed in 10 minutes. Calculate the time taken for the reaction to go to 80 % completion. 

(8) The rate of a reaction triple when temperature changes from 20”C to 50”C. Calculate energy of activation for the reaction (R = 8.314 JK^1 mol^1).

 

A current of 2.68 ampere is passed for one hour through an aqueous solution of copper sulphate using copper electrodes. Calculate the change in the mass cathode and that of anode. ( atomic mass of copper is 63.5 u).

Related Questions:

(1) The conductivity of 0.0011028 mol per liter acetic acid is 4.95 × 10–5 S per cm. Calculate its dissociation constant if ^°m for acetic acid is 390.5 S cm2 per mol–1 .

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How to determine anode and cathode of concentration cell instead of both electrodes are same ?

(5) Write correct Nernst equation for the given galvanic cell containing both the electrodes are M/M (insoluble) salt at 25°c.: Ag(s)|AgCl(s)| KCl(M) || KBr (M)|AgBr(s)|Ag(s): [Given Ksp(AgCl) and Ksp(AgCl)]

(6) A silver electrode is immersed in saturated solution of Ag2SO4(aq). The potential difference between the silver and standard electrode is found to be 0.711 V. determined Ksp(Ag2SO4) given E0Ag+/Ag= 0.799 V

(7) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(8) Calculate the emf of the cell: Pt H2(1atm)ICH3COOH(0.1M) II NH4OH(0.01M)IH2(1 atm)Pt and Ka for CH3COOH= 1.8x10^-5 and Kb for NH4OH = 1.8x10^-5

(9) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(10) Two weak acid solution HA1 and HA2 each with same concentration and having Pka values 3 and 5 are placed in contact with hydrogen electrode ( 1 atm at 25 degree) and are interconnected through a salt bridge find the emf.

(11) The standard reduction potential for Cu2+/Cu is +0.3.4 volt calculate the reduction potential at PH =14 for above couple. ksp fo Cu(OH)2 is 1.0x10^-19.

(12) What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

What current strength ampere will be require to liberate 10 gm chlorine from sodium chloride solution in one hour?

 

Related Questions:

(1) The conductivity of 0.0011028 mol per liter acetic acid is 4.95 × 10–5 S per cm. Calculate its dissociation constant if ^°m for acetic acid is 390.5 S cm2 per mol–1 .

(2) In the electrolysis of aqueous solution of NaOH , 2.8 litre of oxygen at NTP liberated at anode. How much Hydrogen was liberated at cathode ?

(3) On passing 3 faradays of electricity through three electrolytic cells connect in series containing Ag+ , Ca+2 and Al+3 ions respectively , the molar ratio in which three metals ions are liberated at the electrode is

(4) How to determine anode and cathode of concentration cell instead of both electrodes are same ?

(5) Write correct Nernst equation for the given galvanic cell containing both the electrodes are M/M (insoluble) salt at 25°c.: Ag(s)|AgCl(s)| KCl(M) || KBr (M)|AgBr(s)|Ag(s): [Given Ksp(AgCl) and Ksp(AgCl)]

(6) A silver electrode is immersed in saturated solution of Ag2SO4(aq). The potential difference between the silver and standard electrode is found to be 0.711 V. determined Ksp(Ag2SO4) given E0Ag+/Ag= 0.799 V

(7) How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8 hours. At a current of 8.46 ampere? What is the area of tray if the thickness of silver plating is 0.00254 cm. density of silver is 10.5 gm cc.

(8) Calculate the emf of the cell: Pt H2(1atm)ICH3COOH(0.1M) II NH4OH(0.01M)IH2(1 atm)Pt and Ka for CH3COOH= 1.8x10^-5 and Kb for NH4OH = 1.8x10^-5

(9) A current of 3 ampere passed for 2 hours through a solution of CuSO4 3 gm of Cu2+ ions were discharged at cathode calculate the current efficiency.

(10) Two weak acid solution HA1 and HA2 each with same concentration and having Pka values 3 and 5 are placed in contact with hydrogen electrode ( 1 atm at 25 degree) and are interconnected through a salt bridge find the emf.

(11) The standard reduction potential for Cu2+/Cu is +0.3.4 volt calculate the reduction potential at PH =14 for above couple. ksp fo Cu(OH)2 is 1.0x10^-19.